Jim Stordahl
Member
I have a stupid question... I'm trying to figure out how to set the rear wheels on an 1850 to fit 30 inch rows. I can't seem to get them in far enough. The rear
tires are 18.4 x 34. They have a "dished" wheel, which by my calculations, would give an additional 1.5 inches if reversed. Even with sliding the hub all the
way in, and reversing the dished wheel, I can barely get it inside the row, too close for cultivating. Am I doing something wrong? Do I need special rims,
narrower wheels/tires? I would appreciate any advice.
Thanks
Jim NW Minnesota
tires are 18.4 x 34. They have a "dished" wheel, which by my calculations, would give an additional 1.5 inches if reversed. Even with sliding the hub all the
way in, and reversing the dished wheel, I can barely get it inside the row, too close for cultivating. Am I doing something wrong? Do I need special rims,
narrower wheels/tires? I would appreciate any advice.
Thanks
Jim NW Minnesota