Oliver Power unit lifting lug

I am looking for a lifting lug or maybe a picture of one for an Oliver Super 166 power unit I dont know if the 177 or 188s would be the same or not
 
If you are talking about lifting the engine, get a piece of about 1to 1-1/4 inch material about 3 inches long and drill and tap it for 1/2 X 13 threads. Weld about a 3 inch ring on the other end to hook your chain in. I made one and I was going to get a picture of it and put it in the HPOCA magazine.
 
We have a junk 177 back home, I can look at it, but won't be back there for 3 weeks, I can email you then if you want?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top