Another Hydraulic Question

Traditional Farmer · Apr 5, 2015

Changing the hydraulic oil on the 1550 gas I took the coupler ends off the
the two remote hoses on the one side when I cranked the tractor fluid came out of both
hoses under pressure.Got the oil changed and put the ends back on hooked up a cylinder and
the cylinder worked just like it should.Does oil supposed to come out of the hoses when the lever is in the neutral position? And I wonder how it works like its supposed to with the cylinder?

Mike(NEOhio) · Apr 5, 2015

The was the valves are the interlock plunger opens the check ball on the return side. With no resistance on either line I think it would push fluid from both. J.S. could probably tell you for sure.

RWT · Apr 5, 2015

I think it's normal because I have had an 1800 do that. A dealer that's retired now told me they maintain 200 psi on the lines. I noticed it's usually easier to hook remotes with the engine stopped.

RT (My 2 cents.)

Another Hydraulic Question

Traditional Farmer

Well-known Member

Mike(NEOhio)

Well-known Member

RWT

Member

Similar threads