1610 loader question

oliver1755 · Feb 28, 2015

I have a 1610 loader that has been on a 1550 utility since Dad
and Grandpa bought it in the early 70's. I'd like to take this
loader off the 1550 utility and restore the tractor to use. It's
had a hard enough life with this loader on it. I'd also like to put
this back on a 1755 after some refurbishment to the loader
itself.

My question is will it fit? It's enough loader for what we do, but
will it bolt right up to the 1755 and if not, what modifications
would be needed?

Thanks!

Josh in Pa · Feb 28, 2015

I don't know for sure, but I think it will work. I think on the 1550-1655 you used spacers and took the spacers out I use it on the larger framed tractors. You should be able to check with a tape measure easily. Those loaders are pretty light, a 1750 will bend one up pretty easily.
Josh

Wisconsin Cowman · Feb 28, 2015

It will work but in my opinion a 1755 is too much tractor for one of those loaders. Will have to take it easy.

farmerwithmutt · Mar 1, 2015

The book I have shows 1550 1600 1650 1800 and 1850 all use the same brackets. 3 plates on front and clamp on back.bought book on ebay changing farmhand loader from 656 in to 1550 best investment I made . I paid 425 for all hydraulic in good shape .pays to do your homework Schwartz made both farmhand and oliver now a little paint and I got an oliver loader.

1610 loader question

oliver1755

Member

Josh in Pa

Member

Wisconsin Cowman

Member

farmerwithmutt

Well-known Member

Similar threads