Kuebeck89

Member
I picked up an Oliver 770 wide front in pretty good shape. Looking for a few parts for it.

Anyone have headlights with brackets, a grill, or the top link bracket for the 3 point hitch, or the bracket to hold the hydralic lines?
Also need some new side tins for both sides that are not dented or damaged.


Thanks

Here's some pictures
mvphoto16737.jpg
 
FYI that is what is known as a Power traction hitch. The 3 point that was available was called a hydra hitch and it is different.
 
Yes it is a factory hitch. It was made to compete with the IH fast hitch. They offered a 3 or 4 bottom plow model 5440 just to used with that hitch.
 
If your just getting into Oliver, u better subscribe to a Magazine called Oliver Heritage,Lots of information/vender.s in there !!
 
(quoted from post at 23:11:20 02/25/15) If your just getting into Oliver, u better subscribe to a Magazine called Oliver Heritage,Lots of information/vender.s in there !!

Ok will do.
 
Lynch farms makes sheet metal for those Olivers. Not cheap, but they will have well made side panels. I get my Oliver parts mostly from Maibach tractor. They are a state away and I've never been there, order everything I need on the phone. They have a parts yard as well, I bet they can set you up with headlights. The grille may be harder to find a nice one.
Josh
 
You can start at Korves Oliver dot com. Ag Parts First dot com would be another. There's Maibach,Smittys,both in Ohio,Svehlac tractor in Texas. Way too many to mention without leaving somebody out.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top