Oliver OC 3

donharmon · Feb 10, 2015

Just got this Oliver OC3 and not able to get fire to plugs?? Pulled mag but not sure what to look for?? Points look good, right gap but still no fire to plugs?? Any help on this will be much appreciated. Thnks

Dblair · Feb 10, 2015

if it's like my crawlers , hg 42, 31, 68 the points
need a little file work to get the coat of rust of
them , then she'll fire .

r aiken · Feb 11, 2015

I was working on 2 mags for my OC3. Cleaned and adjusted the points, had spark there but no high voltage spark. I got a new condencer from an auto parts store, $6.00, I put it on one and had a good hot spark, tryed the other and still nothing. Sometimes you get lucky on something that has not been ran for 30 years.

donharmon · Feb 11, 2015

I just took it to a mag specialist so will wait and see what happens?? Thnks] for your replies

donharmon · Feb 13, 2015

After 219.00 bucks ,got the critter running somewhat, missing and not hitting on all 4s but will get a new set of plugs and see? Thnks for u alls response

donharmon · Feb 13, 2015

Oh, any ideas on what the BEST plugs for this?? Shows autolite 255 or 265 ??

Oliver OC 3

donharmon

Member

Dblair

Well-known Member

r aiken

Member

donharmon

Member

donharmon

Member

donharmon

Member

Similar threads