Married2Allis
Well-known Member
Hello, if anyone has a 1650 top link assembly like this one give me a holler - thanks: b m c f (at) m y a c t v (dot) net
- Thread starter Married2Allis
- Start date
Nice looking tractor, however the arch piece is on upside down. There are several different part numbers from as early as Super tractors to the 2-70 White. Some are heavier than others and some have the remote cylinder carrier welded on as the one shown.
Married2Allis
Well-known Member
I grabbed this image from ebay for an example, but the top link piece is like one I am looking for. My 1650 followed me home without one. I'm just going by what I see in the operators manual, but it sounds like I should probably learn about the other types if there is more than one. I couldn't seem to find a 'parts manual' for this tractor. Is there one available somewhere or is there a site that lists 1650 part numbers?
90 Percent Retired
Member
108068A 1 Yoke (Alternate 163404-A) (S/N 147569 -)
Add to Pick List 163404A 1 Yoke (S/N 147569 -)
From AGCO parts book site.
http://www.agcopartsbooks.com/PartsBooksN/Viewer/book.aspx?book=agco/w433121/
Add to Pick List 163404A 1 Yoke (S/N 147569 -)
From AGCO parts book site.
http://www.agcopartsbooks.com/PartsBooksN/Viewer/book.aspx?book=agco/w433121/
I sell used parts for Oliver. I have one 1650 top link, complete.
All of the threads are good, and move freely. It is used and
shows some wear, but functions perfectly. It also has the
adjustment rod that goes in the round hole. It is missing in your
borrowed picture. I had 2 units last fall and just sold one into
Pennsylvania in December. Price is $175.00 plus shipping,
which usually runs in the $24-$35 range. I will ship for a flat
rate of $25, so total would be $200. If you are interested I can
supply pictures via e-mail, or you can call me at 231-689-1015
Thanks! Ron
All of the threads are good, and move freely. It is used and
shows some wear, but functions perfectly. It also has the
adjustment rod that goes in the round hole. It is missing in your
borrowed picture. I had 2 units last fall and just sold one into
Pennsylvania in December. Price is $175.00 plus shipping,
which usually runs in the $24-$35 range. I will ship for a flat
rate of $25, so total would be $200. If you are interested I can
supply pictures via e-mail, or you can call me at 231-689-1015
Thanks! Ron
Married2Allis
Well-known Member
Thanks very much for the replies, Bret
greg oliver
Well-known Member
Bret, are you still looking for a parts manual? I saw one on ebay and I checked this site and 1650 parts manual is listed for 62 dollars. Did you figure out what you need for your seat? I can post a pic of my seat if it helps. Greg
Married2Allis
Well-known Member
Hi Greg, I was confused when I looked on ebay because thought I seeing 1650 'loader' parts manuals or something like that. I might grab that one you're seeing if you have the link. The seat part I thought I needed was actually the metal part of the bottom pad -- just a pile of rust now. The adjustment handle part is rusted too but may be usable -- I'll check to see if I need that. Other parts I could use also are a right rear fender or a toolbox. The fender is rusted through at the bottom supports. Also I know of a guy down here who may be interested in what's left of your 1650. I'll call you soon about getting that front-end which is hiding under a layer of snow now, huh?
greg oliver
Well-known Member
Bret, I go to Oliver tractor ebay. I believe manual from Yesterday's tractor is cheaper. I have front end next to the barn right now and figured I better retrieve it before any more snow! Face book has a Oliver tractor site I helped a friend with a Oliver 1600 and he posted pictures and I'm the one with the orange hat. We are headed out to look at an 1850 diesel there are a lot of crazy Oliver people around here.LOL Greg
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy