super 55
Well-known Member
- Location
- Whonnock BC
I posted the other day about fender repairs on my Super 55 and
didn't get any bites. I am posting a picture of the fender braces
on the Shutterfly link. As you can see the arcs on the braces are
not similar. I have lined them up showing the three braces for
the right side fender on the right and the three braces for the left
fender on the left. There is quite a difference on the top arcs. If
any one has a Super 55 with good fenders, could you look and
see if the arcs vary? My thought they should all be the same and
that my fenders were damaged. There is actually one on the far
right that is too straight. I think the first two on the left look the most consistent. If they are all suppose to be the same, I may go with that arc. Any help would be appreciated. I am
just about ready to finish this tractor.
Fender braces
didn't get any bites. I am posting a picture of the fender braces
on the Shutterfly link. As you can see the arcs on the braces are
not similar. I have lined them up showing the three braces for
the right side fender on the right and the three braces for the left
fender on the left. There is quite a difference on the top arcs. If
any one has a Super 55 with good fenders, could you look and
see if the arcs vary? My thought they should all be the same and
that my fenders were damaged. There is actually one on the far
right that is too straight. I think the first two on the left look the most consistent. If they are all suppose to be the same, I may go with that arc. Any help would be appreciated. I am
just about ready to finish this tractor.
Fender braces
