I knew I'd never find a swinging drawbar for the 500,so I made one. It's not quite the same as the original,but it mounts the same.
The original frame was channel iron,bent in to shape. I used angle iron and welded it up. The drawbar itself is a piece of beam off an old Deere F145 plow.
The top picture is mine,the bottom is a picture of an original that I found somewhere.
The original frame was channel iron,bent in to shape. I used angle iron and welded it up. The drawbar itself is a piece of beam off an old Deere F145 plow.
The top picture is mine,the bottom is a picture of an original that I found somewhere.