Now that I'm on the right forum, all my fault, I'm going to repeat myself here a little about my transmission not going into all the gears. I did receive my shop manual, and trying to find a top view in it doesn't show the 3 rails in it once the shifter is removed, only side views. They say to take a long screwdriver and line them all up, I've tried that and it seems like the inbd. and outbd. shafts move fwd. and aft but the middle one does not move, it seems like it is to far forward. By lining them up just, in what relationship are we talking here? I probably need to jack the the rear tires up and rotate them, or possibly remove the transmission top cover. Thanks for all the help and replys..