Oliver 55/66 Offset Intake Manifold

RCP

Well-known Member
Location
Grove City Pa
I was looking at a restored 660 and the carburetor mount on the intake manifold was offset to the front of the tractor. Does this intake manifold have a performance advantage over the centered mount intake manifold?

Thanks
Rich
 
In answer to your questions. The "offset" carb mount is for a larger carburetor and the ports are larger. That manifold was standard on the 3-5/8 inch bore engines used in the 550 (after 1958) and all the 660 models.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top