Oliver 60 oil seal

lloydl2710

New User
Need the seal for the belt pulley shaft. The number stamped on the old one is National 50291 but I can't cross reference it to anything similar.
 
I'll be watching this closely! I need one too... Just came in the
house, been working on a 60 for the last two days and needing a
lot of seals!
 
OOPS forgot to ask...Could I get some measurements of your old seal Inside and outside diameter and thickness.
May help to make sure I get the right one?
Wayne
 
It's NOT rocket surgery.

National or Timken 50291 seals are still readily available.

Or, if your favorite auto parts store stocks SKF/CR, the # is 17653.
 
(quoted from post at 08:02:26 11/30/14) Seems your seal crosses to a CR 17653 seal. I see they have a few listed on E-bay.
Hope this helps.
Wayne
Thanks everybody. I grabbed one from Ebay.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top