Proper plow for a Hart Parr 70

MichaelNEIowa · Nov 15, 2014

How many bottoms was the hp70 designed to pull?

What's the proper/contemporary oliver plow for one of these tractors?

Brendon Warren · Nov 15, 2014

I've got the 2 bottom plow that the farmer bought with my Oliver 70. I'm not sure how many inch bottoms they are. Maybe when I get more time I will get to use them. I've owned them for 25 years.

J. Schwiebert · Nov 16, 2014

My uncle had one, bought the tractor and 2-14's new.

oliverkid · Nov 16, 2014

If I remember my numbers correcltly the plow that was around with the Hart Parrs was called a No. 107 tractor gang plow. However my dad has been looking for one for the last 7-8 years hes had his 70 with no luck. I would just go with a 2-14 Model 100 plowmaster and nobody will try to correct you on it.

MichaelNEIowa · Nov 16, 2014

Thanks!

centralilbaler · Nov 16, 2014

That plowmaster would be a good match

Neil Grant · Nov 16, 2014

I have my father's Cockshutt 70 Standard. We used to pull 3 -12's - a Cockshutt 8A plow. Somtimes in heavy ground we took the back furrow off. i would say 2 -14 or 3-10 would be a great match for it. 2nd gear was good for plowing although some used 3rd gear also, we alwyas used 2nd. Still have the tractor and most likely always will for as long as I am around. I was driving it yesterday!

Hart-Parr 70 owner · Nov 16, 2014

I have a 1937 Hart Parr on full steel and I pull a early plow master 2-14 three wheel on full steel, It dose well in any ground I have plowed from Michigan clay to sand and looks great with the tractor.I have looked for a 107 or a 109 for almost 10 years and found one,I could buy three more tractors for what they wanted and it was a broken pile.

Proper plow for a Hart Parr 70

MichaelNEIowa

Member

Brendon Warren

Well-known Member

J. Schwiebert

Well-known Member

oliverkid

Member

MichaelNEIowa

Member

centralilbaler

Well-known Member

Neil Grant

Member

Hart-Parr 70 owner

New User

Similar threads