Hart-Parr 70 owner
New User
I saw the picture you had in Aug. were did you find it I have been looking for years and every thing I find is beat to death?
- Thread starter Hart-Parr 70 owner
- Start date
Centerplate
Member
- Location
- Green County Wi
I found it in the Northern part of Illinois. Most industrial equipment like that is generally rough by the time it gets that old. I would like to find the correct seat pivot assembly for that. The one on there now flips back for hoe operation and forward for tractor use. Its way too close to drive the tractor.
I need a piece like the one just above the diamond plate. On mine the diamond plate has a half circle ramp that raises the seat when you turn it for hoe operation.
I need a piece like the one just above the diamond plate. On mine the diamond plate has a half circle ramp that raises the seat when you turn it for hoe operation.
Hart-Parr 70 owner
New User
Do you have access to the one you took the picture of, It looks like it would be easy to make one if you had the pattern. The seat assembly looks to be the same as the 00s and the 50s. If you find another one like your please let me know they don't just jump out at you when your looking.Yours looks like new compared to what I have seen.
Centerplate
Member
- Location
- Green County Wi
There is a serial number break where the later one has a couple of rollers that must ride up on the ramp when you turn the seat.
That picture is from the earlier model.
That picture is from the earlier model.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy