larry duda
Member
Does anyone have a pair of cast 38" centers for an Oliver 2150 mfwd with the regular u bolt axles for sale? Larry
- Thread starter larry duda
- Start date
Mitch Poindexter
Member
Spent a lot of time thinking about this on the 2150 FWA we"re finishing up the restoration on right now. I was trying to go with 32 inch cast centers in order to use 30.5"s on mine, so I have gathered a set of G950 tapered wedges to use with the standard wedge style cast centers which would allow use of 32"s or 38"s. The G950 and 2150 axle diameters are not exactly the same (I believe the 2150 is larger by 1/8 inch but would have to check my notes for sure) and will require some machining, but this is an option if you were wanting to go tapered wedge centers.
If you are not looking to go that direction, then just get any set of 38 in cast centers from a 2-110 or 17-1955 etc. and bolt them to the hubs.
If you are not looking to go that direction, then just get any set of 38 in cast centers from a 2-110 or 17-1955 etc. and bolt them to the hubs.
larry duda
Member
Daniel, how can I get in touch with you? Larry
larry duda
Member
Mitch, give me a call at 815-823-6949. I mite know where a pair of 32" castings are. Larry
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy