770 pump rebuild

Anonymous-0 · May 1, 2014

Posted here a couple times and appreciate all the info . Thanks to Nick F for parts and info. I am putting every thing back and am having problems getting the pto shaft back in . Any suggestions ?

chucksoliver77 · May 1, 2014

Did you have the pto main housing Off? If you did you have to leave it loose until you slid the pto shaft all the way in, then tighten the housing, as the bearing aligns the housing with the rear end housing. Hope this helps, Chuck

Anonymous-0 · May 1, 2014

The pump drive shaft need to be installed in the pump with the splines toward the front of the tractor too.

770 pump rebuild

Anonymous-0

Well-known Member

chucksoliver77

Well-known Member

Anonymous-0

Well-known Member

Similar threads