Early Plowmaster 100 ?

J.Wondergem

Well-known Member
Location
Rockford, Mi.
I just got this early model 100 home and was looking it over. The points look like are from another model and been torched off. The plow looks to be a 12" cut. The moldboards have a twist at the heel of the point that I don't recognize. On the back side it looks like it says Oliver Raydex. So which points are the proper ones? Are these the original style moldboards?
Well I tried down loading some photos but something changed and I didn't I guess, cause I can't get it to work.
 
The pic on your later post those moldboards look like the same as I had on a couple of 3 bottom Olivers I had, All 12" and if I could have gotten a deep suck share instead of the plain no nose blade share would have been a good plow. Same bottom as on the Dearborn econimy plow. I just did not like the frame on mine. Could not set things for the wider wheel tread I had so got a Deere but if I could have put those bottoms on the Deere frame and gotten a deep suck share then it would have been a great plow.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top