310 gas crankshaft

Anonymous-0 · May 7, 2013

What needs to be done if anything to the pressure feed crank when using splash oiling rods? Do I need to plug the oil passage ways in the crank?

oliver90owner · May 7, 2013

The answer lies is in the type of lubrication you have.

The 310 has pressure lube? blocking the oilways will reduce lubrication to zero?

Other than that, not really sure what you have.

Anonymous-0 · May 8, 2013

Using a 77 2in rod on a 310 crank.

Goldsburg · May 9, 2013

Ollie -

You should tig weld the holes of the top of the 77 rods shut and use the pressure oiling of the 310 crank, if possible. If the stroking has "eliminated" the oil galley in the crank, I would recommend having those galleys re-drilled. Pressure fed is better than splash, especially at high engine speeds and loads.

Regards,

Goldsburg

310 gas crankshaft

Anonymous-0

Well-known Member

oliver90owner

Member

Anonymous-0

Well-known Member

Goldsburg

Member

Similar threads