cooler pump

Anonymous-0 · Feb 25, 2013

I recently put a new cluch in the 1855 and the pump (up front) is noisy. I took the lines off and it not pumping any oil. Any help will be much appreciated.

Josh in Pa · Feb 26, 2013

Do you mean the hydraulic cooler pump? Not sure how it relates to your new clutch? That pump is expensive, around $900 I think. I had my last one rebuilt, ordered a reseal kit from agco and my local machine shop polished the shafts and made new bushings. Cost about $300. Don't over tighten the belt, it puts a lot of load on the shaft/ bushing.
Josh

Anonymous-0 · Feb 26, 2013

Yes the hydraulic cooler pump. I had to take the lines off to pull the motor out and as far as I know it was working before that. Was yours not pumping or just leaking? There is no oil going through mine.

Josh in Pa · Feb 26, 2013

It's been a few years but I don't think it was pumping, and when I started messing with it it started to leak badly around the front seal. I think the seals leak, they suck air and loose prime.
Josh

cooler pump

Anonymous-0

Well-known Member

Josh in Pa

Member

Anonymous-0

Well-known Member

Josh in Pa

Member

Similar threads