Oliver 77 Bull Gears?

showdown

Member
Does anyone known if I can remove my bull gears in my 77RC without pulling out the axles/ I haven't taken of the the cover yet, didn't known if there was just a nut on the end of the axle to come off then just slide the bull gear off? Thanks for any help.
 
you don't have to take them all the way out but you have to pull them out about 6-8 inches to clear the bull gear. just unbolt the axle retainer on the outside end of the axle housing, take the clip off the inside end of the axle and pull it out. no need to remove the hub. good luck, Chuck
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top