Oliver 520 or 620 baler

Guys,

Looking for some parts new or used. Need some:

Z-6553 tine clips
519 513 E clutch springs
516 297 E shield
519 511 E clutch disc

If you have something, let me know. Also, needed an oil seal 106-959 A oil seal. I can"t find a cross number to buy one. Ideas??
 
I also need some 520 parts.
Sorry to rain on your parade, but the parts are getting very scarce, (a new needle for the 520 is still available, but it's $280 and made of aluminum) and the people who say they have the parts or can help me out never again return my email. Good luck.
 
Two 520 balers in southwestern PA for sale. One was used as recently as July 2012 and the other is only missing the clutch and PTO shaft. $1000 takes both. Email or message for more details.
 
Is this D Day below Pittsburgh? If so, the balers looked nice. I just got find a way to move them. Shoot me a mail again with your info so we can talk.
 
I need the complete PTO shaft from the flywheel forward. I purchased this from the scrap-man and had to run it over the scale to figure my cost. It was missing one needle and the PTO. A guy felt sorry for me and sold me the needle for a good price, but if nobody will sell me the PTO, I'm going to have to make one from other parts or other balers. Email should be open.
 
Actually, I'm his brother. I don't see your email address on the forum, nor can I figure out how to use private messages. Send me an email at todd.d.day@gmail(DOT)com
 
How hard did you look for these parts? Out of the 5 number my friend has two of them in stock, the clips and the oil seal. Two of the others are still available.
 
Mr. S,

I tried a few dealers and they said they did not have any. So, I figured would try here so I could get some tine clips used but wanted new ones. I would not have wasted the time of any of "the finest gentlemen in farm machinery" on the site because I know the value of the information. I always appreciate the guidance and tutorials from your knowledge and many others too. With that being said, I just was getting nowhere and hoped I could get some direction. Thank you always for the info and help.

As for the seal in the bottom of the gemmer steering unit, all of our 1800 A series have them in there and the units work well. However, this one rascal is leaking from the center shaft and I wanted to replace the seal with like or see if there is another that is more durable or double lipped than the original? I could not cross the number 106 959-A to anything. C-R, National, NAPA, SKF, etc. Larry Harsin rebuilt the unit a while back and works great. Just leaking some. Any suggestions??? Thanks so much.
 
Mr. S,

I tried a few dealers and they said they did not have any. So, I figured would try here so I could get some tine clips used but wanted new ones. I would not have wasted the time of any of "the finest gentlemen in farm machinery" on the site because I know the value of the information. I always appreciate the guidance and tutorials from your knowledge and many others too. With that being said, I just was getting nowhere and hoped I could get some direction. Thank you always for the info and help.

As for the seal in the bottom of the gemmer steering unit, all of our 1800 A series have them in there and the units work well. However, this one rascal is leaking from the center shaft and I wanted to replace the seal with like or see if there is another that is more durable or double lipped than the original? I could not cross the number 106 959-A to anything. C-R, National, NAPA, SKF, etc. Larry Harsin rebuilt the unit a while back and works great. Just leaking some. Any suggestions??? Thanks so much.
 
4500 HESSTON Is the Same Baler =Oliver Bales were Sold out to Hesston /We have 520& 720 & 4500 Hesston They are all the same.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top