88 standard

rod in nebraska · Feb 10, 2013

Just got a 88 gas standard and a super 88 diesel standard, both do not have hydraulics on them, can a person take some off a donor tractor to have some, what do i have to watch for to make sure it fits and works, thanks rod

Anonymous-0 · Feb 10, 2013

Well the units will fit right on there. Do any of the tractors have a mechanical lift? If so the top shaft in the transmission will need to be sawed off or changed from the doner tractors. The K-914 shift lever socket will need to be changed as well. You will need the K-914A socket from the tractors that have the hydraulic units. If you add the hydraulics, and it was me unless you know the history of the hydraulic units I would completely disassemble them and clean then up and inspect for wear. Also remember the Fleetline hydraulic units were different from the Super seris if looks and the correct police are important to you.Also if you have the Fleetline units you should also grab the electrical switches and wiring harness.

Anonymous-0 · Feb 10, 2013

rod.give me a call about hyd. units 402 629 4230

jordan hackman · Feb 11, 2013

they will fit right in. our 88 standard didn't have hydraulics either when we bought it and we installed some.

88 standard

rod in nebraska

Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

jordan hackman

Member

Similar threads