oliver 1950gm pto drive hub

I'm trying to figure out how to fix the pto drive hub cant find aftermarket hub has anybody else run into this problem will a hub for another model tractor work.
 
I bought mine from AgCo a couple of years ago.

I would stick with the OEM if I were you, it needs to be strong enough to handle 100+ horsepower. You don't want to be yanking the engine when the weather is going for a downturn.
 
I boutgh one from O'Brien County Implements about 10 years ago.

http://www.obci.net/oliver_parts.htm
O'Brien County Implement
Highway 18 East
Sheldon, IA 51201
Toll Free 800-320-6224
Local 712-324-4871
Untitled URL Link
 
I had a 1950, and it lost hyd and pto. We pulled the engine to find that the bolts holding it to the flywheel were all broken. We had the PTO shaft checked, and it was bent. Somewhere in it's past life someone apparently pulled the engine without removing the PTO shaft first. Be a good idea to check yours as long as it is out.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top