Are seals available for 1610 loaders?

Alan K · Nov 20, 2012

Got my model 1400 Schwartz loader home (assuming it is the same as a 1610) Are seals available for these yet? Anyone know what is all needed to do them?

Gleanerguy · Nov 20, 2012

Yes they are. My brother went to the local AGCO dealer and he ordered them. Not cheap. About $100 per cylinder. Maybe there's other places to get them also?
I helped him put the seals in. Not a fun job. Now I understand why there are businesses that just deal with rebuilding hydraulics. They probably have better specialized tools for that kind of job, than what we used.

Anonymous-0 · Nov 20, 2012

What you need to know for the lift cylinders is the diameter. Smaller cylinders were used on tractors that had higher pressure systems. Also as was mentioned there are companies that cator just to seals for cylinders.

Alan K · Nov 20, 2012

Are they special seals or regular "O" rings with back up washers?

Doug A. Mn · Nov 20, 2012

I replaced the seals in one of the long cylindars from my 1610 loader about a year ago. Got all the parts from my local Agco dealer. I believe it came to about $50 per cylindar. The hardest part was the nut inside that holds everything together. It was staked and with out the proper spanner wrench it turned very hard. I think I still have the diagram and numbers.

Alan K · Nov 20, 2012

Here are a couple of pictures of the loader.

Geoff in KS · Nov 21, 2012

Try here.
Baum Hydraulics

Are seals available for 1610 loaders?

Alan K

Well-known Member

Gleanerguy

Member

Anonymous-0

Well-known Member

Alan K

Well-known Member

Doug A. Mn

New User

Alan K

Well-known Member

Geoff in KS

Member

Similar threads