Oliver 1610 / Schwartz 1400 loader info--parts needed

Alan K · Nov 15, 2012

Bought a Schwartz 1400 trip bucket loader and would like to convert it to hydraulic bucket but need the measurements of the cylinders for it. From the looks of it it is the same as the Oliver 1610s. Anyone have one for parts?

Josh in Pa · Nov 15, 2012

I have a 1610 in Pa for sale. It has hydraulic tilt.
Josh

Alan K · Nov 15, 2012

Bad part is Im in Minnesota. I may be interested in some pictures and or measurements of the hydraulic cylinders for the bucket tilt if that would be possible.

j meyer · Nov 15, 2012

I got a set of steel hydraulic lines you"ll be needing, Alan. You can measure my cylinders when you come get the lines and deliver those 3 rings your making for me!!!

Alan K · Nov 15, 2012

LOL....you know, I was cleaning up the shop so I can get to work on things in there again after fall work and looked at the ring and said....got to get those done too. Been trying to get a loader on a tractor before the snow flies as my Super 77 Industrial is getting tired. Will try and get them done soon....Thank you for your patience.

j meyer · Nov 15, 2012

Yep, no problem Alan, just keep in mind I won"t forget! Let me know if you want those steel lines too.

Alan K · Nov 15, 2012

If I get some cylinders lined up I may be interested in them. (got any pictures of them you can send?) I did look at a 1610 that was on an 88 but was sold so I didnt get it. That was hydraulic all the way around.

Oliver 1610 / Schwartz 1400 loader info--parts needed

Alan K

Well-known Member

Josh in Pa

Member

Alan K

Well-known Member

j meyer

Member

Alan K

Well-known Member

j meyer

Member

Alan K

Well-known Member

Similar threads