6 cyl. gas. Built in hydraulics. Has a leaver that
operates it and another leaver that might operate
the PTO. i don"t know what that is for. I parked it last spring. Started it today. Started first time around. Runs beautiful. Will not move. Put it into gear and nothing. Took the cover plate off and the trans is moving and it shifts. The gears will grind if you do not put the clutch in. Cannot even tow it. Made no noise. No crunch. No pop, no bang, no lurch forward. It did nothing. Clutch is fine. I"m thinking it might be frozen but if it was the motor should stall. If you pull hard on the leaver by the PTO, i think that is what it"s for you can stall the engine. any ideas ? Thanks in advance. greg [email protected].
operates it and another leaver that might operate
the PTO. i don"t know what that is for. I parked it last spring. Started it today. Started first time around. Runs beautiful. Will not move. Put it into gear and nothing. Took the cover plate off and the trans is moving and it shifts. The gears will grind if you do not put the clutch in. Cannot even tow it. Made no noise. No crunch. No pop, no bang, no lurch forward. It did nothing. Clutch is fine. I"m thinking it might be frozen but if it was the motor should stall. If you pull hard on the leaver by the PTO, i think that is what it"s for you can stall the engine. any ideas ? Thanks in advance. greg [email protected].