pic of unknown lever

Here is a pic of that lever going into the clutch housing
a87572.jpg
 
That's just the return spring that hooks to the arm on the throw out bearing. It's not supposed to be hooked there. I don't have the side panels off mine to tell you where it's supposed to hook,but that one looks like somebody just hooked it in the belt pulley rod.
 
Somebody took the belt pulley off and did not install the seal retainer. You can tell because they left the belt pulley drive gear on. When the retainer is installed there is a place cast into the retainer where the end of the spring hooks. ou will need a retainer. They are the same for a 77 or 88.
 
Here is a picture of the bearing/seal retainers you need. Numbers 1 and 2 are for the 77/88's where #3 is for the 770/880's.
a87603.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top