Author	[Modern View]
Hay man we need straw 10-27-2012 14:17:47 66.87.82.146 Report to Moderator	I have this handle that is on the dash lower left side. that connects to a rod going down to a spring which then turns into this little rod that goes into the bell housing doesn't seem like it does much of anything there is no tension on it any ideas? Thanks [Reply]   [No Email]
hay man we need straw 10-28-2012 06:29:20 24.148.108.127 Report to Moderator	Re: Oliver 77 unknown lever on dash in reply to Hay man we need straw, 10-27-2012 14:17:47   added pic to new thread [Reply]  [No Email]
Carlton Grambo 10-27-2012 19:49:34 66.188.242.20 Report to Moderator	Re: Oliver 77 unknown lever on dash in reply to Hay man we need straw, 10-27-2012 14:17:47   It sounds like it is the pulley engagement lever like on our 77 Row Crop. [Reply]  [No Email]
Hay man we need straw 10-27-2012 17:47:22 209.105.143.151 Report to Moderator	Re: Oliver 77 unknown lever on dash in reply to Hay man we need straw, 10-27-2012 14:17:47   This rod going into the housing is very small. The handle starts out big. About 7/16 inch. Then it goes to this spring that straitens out into the housing about 1/8 inch rod. Ill try and post some pics tomorrow. I dont believe it to be a hand clutch. But i think it has something to do with being it goes into the housing about 1 inch next to the foot clutch rod Thanks again [Reply]  [No Email]
J.Wondergem 10-27-2012 14:56:25 70.194.3.71 Report to Moderator	Re: Oliver 77 unknown lever on dash in reply to b a star, 10-27-2012 14:17:47   Quoting Removed, click Modern View to see Sounds like something that has been added. Can you post a picture? [Reply]  [No Email]
Hey 10-27-2012 14:21:17 66.87.82.146 Report to Moderator	Re: Oliver 77 unknown lever on dash in reply to Hay man we need straw, 10-27-2012 14:17:47   Forgot to add it goes in by clutch. So i imagine it has something to do with that Thanks [Reply]  [No Email]
J. Schwiebert 10-27-2012 16:19:34 209.143.33.150 Report to Moderator	Re: Oliver 77 unknown lever on dash in reply to Hey, 10-27-2012 14:21:17   Is this a Fleetline 77 or a Super 77? The first thing that came to my mind was the rod to engage and disengage the belt pulley. If your tractor does not have the gearbox for the pulley maybe at one time it did. [Reply]  [No Email]
Hay man we need straw 10-27-2012 17:48:52 209.105.143.151 Report to Moderator	Re: Oliver 77 unknown lever on dash in reply to J. Schwiebert, 10-27-2012 16:19:34   1950 oliver 77 rowcrop [Reply]  [No Email]
rrlund 10-27-2012 17:16:24 207.241.137.116 Report to Moderator	Re: Oliver 77 unknown lever on dash in reply to J. Schwiebert, 10-27-2012 16:19:34   They had an optional hand clutch didn't they? I think I remember Sherry showing one in the magazine one time and even telling what the option cost. [Reply]  [No Email]