1755 hydraulic cooling pump

siskowitgal · Sep 8, 2012

Is an aftermarket pump used to replace the engine driven hydraulic cooling pump? I am going to reseal my existing pump, but have read that this might be foolish.

BradWi · Sep 8, 2012

I dont know if he is still in business,but Faribo tractor used to rebuild those pumps or exchange them.I know he sold out but heard he is getting back into it.Faribault, Mn.

siskowitgal · Sep 8, 2012

(quoted from post at 23:36:53 09/08/12) I dont know if he is still in business,but Faribo tractor used to rebuild those pumps or exchange them.I know he sold out but heard he is getting back into it.Faribault, Mn.

Thanks for the reply, I will look him up. I installed the seal kit early this morning, and spread manure with it for 8 hours. Not a drop yet, although the bushings do look a bit worn.

UP Oliver · Sep 8, 2012

Do you mind me asking where you got the kit?

I'm looking for one for my 1755.

Thanks

siskowitgal · Sep 9, 2012

(quoted from post at 05:19:53 09/09/12) Do you mind me asking where you got the kit?

I'm looking for one for my 1755.

Thanks

Lulich Implement, ask for Bonnie. 715-746-2477 the part number is:30-3142450

B A Star · Sep 10, 2012

   That pump only pumps fluid through the cooler and back to the resevoir.  The pully shaft is running in a bushing.  The point is you don't need the belt fiddle string tight.  Run it with a lot of slack like the OM states.

1755 hydraulic cooling pump

siskowitgal

New User

BradWi

Member

siskowitgal

New User

UP Oliver

Member

siskowitgal

New User

B A Star

Member

Similar threads