Author	[Modern View]
whays 06-27-2012 22:45:56 71.115.113.61 Report to Moderator	New to the forum and need some help. I am working on a 1941 Oliver Row Crop 60 and the rear rims are rusted out and beyond repair. They are 36" rims with the nine (9) hole pattern. I would appreciate any information anyone may have as to where I might be able to locate two rear 36" rims. I have looked on several sites and have not been able to find any rims. Thanks in advance for your help. Wes [Reply]   [No Email]
brandon j 06-29-2012 17:39:21 75.100.14.243 Report to Moderator	Re: Oliver Row Crop 60 Rear Rims in reply to whays, 06-27-2012 22:45:56   i have a pair on a 41 60 parts tractor i am in wi you can call 6082140422   [Reply]  [No Email]
Dale Kremnetz 06-29-2012 02:23:29 214.13.81.211 Report to Moderator	Re: Oliver Row Crop 60 Rear Rims in reply to whays, 06-27-2012 22:45:56   I am currently working on a 1948 model 60 and had the same problem. I took the tires off the wheels and then ground the rivets off, from the inside of the wheel, then pounded the rivet out with a punch. After I did that, I found that as bad as the rim was, the center hub was in nice condition and purchased a new rim from Millers, and welded it in place. Good for another 64 years!   [Reply]  [No Email]
whays 06-28-2012 17:31:08 71.115.113.61 Report to Moderator	Re: Oliver Row Crop 60 Rear Rims in reply to whays, 06-27-2012 22:45:56   Thank you for your prompt replies. Looks like it may be a bit tough finding some rims. The tires that are on the tractor (and I think they are original but don't know for sure) are 10-36. I would like to keep the 36" rims if possible, but if I can't find any the 32" and 28" rims more readily available? I am located in North Central Texas, about 40 miles South of Abilene and I-20. Thanks again for the help.   [Reply]  [No Email]
Ron Grother 06-28-2012 15:29:16 72.224.240.70 Report to Moderator	Re: Oliver Row Crop 60 Rear Rims in reply to whays, 06-27-2012 22:45:56   your better off put some 32 or 28 on it   [Reply]  [No Email]
mike french 06-28-2012 14:05:00 76.2.190.231 Report to Moderator	Re: Oliver Row Crop 60 Rear Rims in reply to whays, 06-27-2012 22:45:56   Location?   [Reply]  [No Email]
J.Wondergem 06-28-2012 05:16:25 70.194.4.60 Report to Moderator	Re: Oliver Row Crop 60 Rear Rims in reply to Dieseltech, 06-27-2012 22:45:56   Miller tire has a 36x9. Is this the size your 60 takes? If it is, you can cut the centers out of yours and weld them into the new rims.   [Reply]  [No Email]
dblair 06-28-2012 05:16:16 76.123.45.121 Report to Moderator	Re: Oliver Row Crop 60 Rear Rims in reply to whays, 06-27-2012 22:45:56   might be able to get them here . Cross Machinery and Mfg in Mindenmines , Mo.   [Reply]  [No Email]