Ordered a kit from Zane for adjusting the lift on my 600 series years ago. Finally got to it this fall, all the control was in the last 2 inches of the arm. Found the cam follower pin
was completely cut through. Followed Zanes instructions, made the adjustments with the wood feeler gauge, used a brass drift on a rivet gun to drive the pin in, and now the draft
arm works great. Thanks Zane.
was completely cut through. Followed Zanes instructions, made the adjustments with the wood feeler gauge, used a brass drift on a rivet gun to drive the pin in, and now the draft
arm works great. Thanks Zane.