stabilizer bar kit

I need some also. I have seen some that the stabilizer bars are straight. Some have slightly bent ends. Which is better, I would think the slightly
bent ones. Why sell the straight ones? Thoughts please.
 
I only have the bracket on one side. Thought I could take it off and make one just like it instead of ordering one. Can't be too hard to do.
 
Check out the other site. Look at the how to section. Look at the 3 point section, then go down to bars 101. The plans, measurements
description is all there,
 
(quoted from post at 21:01:17 10/13/16) I wish to be able to get a stabilizer bar kit plus lift arm extensions for Ford 1952 8N

You might think about buying one regular flat bar and one adjustable bar. The adjustable ones are made in turn buckle style like the top links. Sometimes it can be a PIA to get everything to line up so you can put both bars on easily.

If you put the flat bar on first, then you can adjust the other one to line up the eyes with the pins easily. It can also be used to center your implement behind your tractor.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top