Tall T
Well-known Member
I got my Brush Hog 3-pt connection quandary resolved.
I mounted the lower link pins on the insides of the A Frame with a few shims to narrow the pin-to-pin distance more.
The fact that my lower arms were splayed out so wide that I could barely connect my sway bars, also brought the Cutter in too close to my tires and riding off center as well.
Was starting to think about changes to my sway bars, or using chains instead when I measured the pin separation on my other attachments and found how much closer together they were.
I mounted the lower link pins on the insides of the A Frame with a few shims to narrow the pin-to-pin distance more.
The fact that my lower arms were splayed out so wide that I could barely connect my sway bars, also brought the Cutter in too close to my tires and riding off center as well.
Was starting to think about changes to my sway bars, or using chains instead when I measured the pin separation on my other attachments and found how much closer together they were.