9N lift piston rings

Have new o-ring and backup washer, need to know for sure how it goes on the piston. Does the O-ring go
on first near the solid end of the piston? Does the backup washer go in the same groove near the hollow
end? I don,t want to sound dumb, but I want to do it right. I am looking forward to try it out. Thanks
again for all the help from this board
 
(quoted from post at 20:15:54 08/15/16) Have new o-ring and backup washer, need to know for sure how it goes on the piston. Does the O-ring go
on first near the solid end of the piston? Does the backup washer go in the same groove near the hollow
end? I don,t want to sound dumb, but I want to do it right. I am looking forward to try it out. Thanks
again for all the help from this board

Both rings in the same groove with backup ring on side of o-ring opposite pressure.

TOH
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top