I have started a complete rebuild of a 1950/51 8N purchased new by my dad in 1951 S/N 336748
Have the engine pulled and completely disassembled. Fairly easy except the intake valve guides were a PITA to remove.
Now here is the problem. According to YT catalog I should have the 3/4 oil pump gear width. Instead it measures 9/16.
This engine has never been apart and I am the only one to ever work on it or service it since about 1962. (my dad was not mechanically inclined and I started very young).
Any ideas on what is up with this and what else might be different than it should be for the year and s/n before I start ordering rebuild parts.
Have the engine pulled and completely disassembled. Fairly easy except the intake valve guides were a PITA to remove.
Now here is the problem. According to YT catalog I should have the 3/4 oil pump gear width. Instead it measures 9/16.
This engine has never been apart and I am the only one to ever work on it or service it since about 1962. (my dad was not mechanically inclined and I started very young).
Any ideas on what is up with this and what else might be different than it should be for the year and s/n before I start ordering rebuild parts.