(800) 853-2651
SHOP NOW

9N

agreed. When i see machines being sold that don't run but need a 5$ or 20$ part, It immediately makes me think the seller is dishonest or a scheister trying to pawn off a broke machine on someone.

I say a used equipment dealer selling a vintage JD tractor cheap cheap saying it needed a switch .....really? why not replace the switch and get 3x money...
 

"Never seen a 9n/2n with scalloped rear center disks?"

i know nothing about scalloped rears, but that looks like an 8N to me, going by the small front hubs.
 

"Location of the battery tells me
it's a 2n with 8n front hubs."

hmmm ok, the battery in an 8N would be farther forward, with the tool box behind it?

which begs the question, what happened to this one's tool box? i'd say any potential buyer should ask for 100 bucks off due to this crude piece of misdirection ;)
 
(quoted from post at 13:07:47 07/25/16) Location of the battery tells me
it's a 2n with 8n front hubs.
Click to expand...
I agree John, 3 speed trans, battery up under the hood, oval
radius rods, 9N/2N 6 bolt rear hubs, etc. A typical mutt.
Probably works perfectly well in the right hands.

There was an old guy here that torched his centers into scallops
like that after he replaced the hat rims with 6 loop rims.
He said he did it for the same reason Ford did it.
So he could turn the rims or centers a bit and move the tires
from the front side of the centers to the rear side of the centers
to adjust width without having to remove the centers from the
tractor. His story not mine, I'm only repeating it.
 
(quoted from post at 17:48:53 07/25/16)
"Location of the battery tells me
it's a 2n with 8n front hubs."

hmmm ok, the battery in an 8N would be farther forward, with the tool box behind it?

which begs the question, what happened to this one's tool box? i'd say any potential buyer should ask for 100 bucks off due to this crude piece of misdirection ;)
Click to expand...
Battery on the 8N is below the hood and the small rear hub/bolt pattern for comparison.

38403.jpg
 

royse, ty for the graphic demonstration of how i ? an idiot. i have no idea how i didn't know there was a huge difference in the REARS :oops:

on the bright side, tho, i'm starting to think i'm one of only 3 people on earth (the other 2 being the guys who helped me) who can remove an N oil pan without removing the front axle. so i got that going for me.

and relax, this isn't gonna turn into an ammeter thing ;)
 

royse, ty for the graphic demonstration of how i ? an idiot. i have no idea how i didn't know there was a huge difference in the REARS :oops:

on the bright side, tho, i'm starting to think i'm one of only 3 people on earth (the other 2 being the guys who helped me) who can remove an N oil pan without removing the front axle. so i got that going for me.

and relax, this isn't gonna turn into an ammeter thing ;)
 

ahh, i see my backwards R provokes a forum bug :lol:

no, i don't just mean the question mark it got replaced by, more thinking of the eloquent error message i got about the search index :D
 
(quoted from post at 23:18:36 07/25/16)
royse, ty for the graphic demonstration of how i ? an idiot. i have no idea how i didn't know there was a huge difference in the REARS :oops:

on the bright side, tho, i'm starting to think i'm one of only 3 people on earth (the other 2 being the guys who helped me) who can remove an N oil pan without removing the front axle. so i got that going for me.

and relax, this isn't gonna turn into an ammeter thing ;)
Click to expand...
I hope by now you know I am not out to make anyone seem like
an idiot and I hope the picture helps everyone see the differences
John was talking about in his post.
None of us know it all. The collective trust has yet to fail me tho!

As to the ammeter thing, differences in opinion are good.
They start conversations with different views expressed.
Links are attached for learning and broadening of horizons.
My own included. We can all learn from open discussions, have
differences of opinion and not be mortal enemies afterwards.
Assuming we are all adults that is.
Isn't this called a "discussion forum"? :)
 

"I hope by now you know I am not out to make anyone seem like
an idiot"

i do know that. besides, you'll never be as good as i am at making me look like an idiot ;)
 
(quoted from post at 22:48:53 07/25/16)
"Location of the battery tells me
it's a 2n with 8n front hubs."

hmmm ok, the battery in an 8N would be farther forward, with the tool box behind it?

which begs the question, what happened to this one's tool box? i'd say any potential buyer should ask for 100 bucks off due to this crude piece of misdirection ;)
Click to expand...

I have one I'll sell you for $100 bucks! I only paid $5 for it at a consignment auction. Not that it would even fit on this tractor anyway.
 
(quoted from post at 15:07:29 07/26/16)
(quoted from post at 22:48:53 07/25/16)
"Location of the battery tells me
it's a 2n with 8n front hubs."

hmmm ok, the battery in an 8N would be farther forward, with the tool box behind it?

which begs the question, what happened to this one's tool box? i'd say any potential buyer should ask for 100 bucks off due to this crude piece of misdirection ;)
Click to expand...

I have one I'll sell you for $100 bucks! I only paid $5 for it at a consignment auction. Not that it would even fit on this tractor anyway.
Click to expand...

:lol:

bless your heart, W_N, and my apologies for typoing u earlier :oops:

this is what makes this site so great, people willing to do anything to help a fellow N owner out :D
 

and i promptly do it again. DOH.

W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B
W_B W_B W_B W_B W_B

now, maybe i'll get it right next time. royse, see what i meant about who's most qualified to make me look like an idiot? :)
 
You must log in or register to reply here.

Similar threads

A
tractor for sale
Replies
0
Views
329
Abbby
A
8
8N With Everest Transmission.
Replies
9
Views
1K
HFJ
H
D
craigslist 9N genny single side terminal
Replies
9
Views
911
JMOR
J
8
9&2N Steel Wheels
Replies
5
Views
314
Tim PloughNman Daley RIP
T
C
rare tractor for sale
Replies
10
Views
375
BarnyardEngineering
BarnyardEngineering
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top