I think I'll blame Howdy1960

Royse · Jul 23, 2016

I know its not his fault but I can still blame him!
This morning he said I needed another project.
Then this jumped on my trailer and followed me home.

1950 side mount 8N, front blade with two sets of skids and a set
of caster wheels that pin on to maintain height, blade also has
limiter chains on the front for quick adjustment. Disk, plow,
scoop, middlebuster, boom pole, spare rim blanks,
Boxes of parts and almost new tire chains still in the truck.

Runs good, sheet metal is better than many I see, tires fair
and usable. It will need some TLC on oil leaks for sure.
Guess I needed something to do while the other paint dried.

howdy1960 · Jul 23, 2016

HEY, that's cheating LOL

Nice find also

I'll take the credi... er... blame for that one

Royse · Jul 23, 2016

I thought you might get a chuckle out of that Howdy.
It was 50 miles each way and I had to make two trips.
Took about 5 hours out of the day but the Farmall paint
was dry when we got finished so all was well.

Benj R · Jul 23, 2016

That is a nice find. Wishing that it were mine,I cant ever seem to get enough of those Ns.

ScoutB · Jul 23, 2016

That's quite a haul you got there. Nice find indeed. I admire your ambition - I spent the day in the lake and in the AC avoiding the heat.

HFJ · Jul 23, 2016

i did NOT get another tractor today.

i'm blaming howdy too

Royse · Jul 23, 2016

So neither one of made it to the big tractor pulls this year Scott!
Got to meet some very nice people this way though.

I'm going to keep this boom pole and sell my old one.

Probably sell the plow, middlebuster, disk and scoop too
since I already have them. It was a package deal.

He had been using the plow as is but it needs a lot of work.
Moldboards and shares at least. It does have coulters and
jointer arms and chains. Somebody can probably ID it from
the picture. I think it may be a Dearborn Economy. Tag is on
it but painted over and I haven't had a chance to clean it off.

If you're interested in any of it shoot me an email.
I'll keep it off CL that way until you're ready for it.
I still have the engine here too if you want to mess with it.
I haven't taken it out of the tractor yet though.

Royse · Jul 23, 2016

Talk about cheating HFJ! We can't all gang up on him! :lol:

Clifford B. · Jul 23, 2016

(reply to post at 20:01:29 07/23/16)

You sir, have luck like my youngest brother when it comes to good deals, both of you could fall through
an out house floor and come up with a gold nugget.... 8)

GB in MT. · Jul 24, 2016

[b:97e443b29d][i:97e443b29d]
AND, Joanie, is prob. thinking......she has to hurry up and heal, cause now, she has a bunch more crud to clean up and paint.

Better give her another raise in pay!!!!!!!!!!!!!!!!! :lol:

Gary :shock: [/i:97e443b29d][/b:97e443b29d]

Royse · Jul 24, 2016

Can't afford to give her a raise, I just bought a tractor!

Here's a couple of the new parts that were in the boxes.
Don't find too many originals anymore.

HFJ · Jul 24, 2016

"Can't afford to give her a raise, I just bought a tractor!

"

:lol:

u did tell her it was howdy's fault, right?

tracto-man · Jul 24, 2016

I saw that and thought, I'll bet Royse would like that! LOL!

I may be interested in the 3 point disc and possibly the plow. Email should be open.

Royse · Jul 24, 2016

(quoted from post at 13:18:42 07/24/16)
"Can't afford to give her a raise, I just bought a tractor! "

:lol:

u did tell her it was howdy's fault, right?

I did! She was really happy it wasn't her fault this time! :lol:

howdy1960 · Jul 24, 2016

Don't feel bad, I only gots me one tractor ~cry~

At least I only gots me one headache LOL

howdy1960 · Jul 24, 2016

LMAO!!!

ScoutB · Jul 24, 2016

(quoted from post at 23:00:12 07/23/16) So neither one of made it to the big tractor pulls this year Scott!
Got to meet some very nice people this way though.

I'm going to keep this boom pole and sell my old one.

Probably sell the plow, middlebuster, disk and scoop too
since I already have them. It was a package deal.

He had been using the plow as is but it needs a lot of work.
Moldboards and shares at least. It does have coulters and
jointer arms and chains. Somebody can probably ID it from
the picture. I think it may be a Dearborn Economy. Tag is on
it but painted over and I haven't had a chance to clean it off.

If you're interested in any of it shoot me an email.
I'll keep it off CL that way until you're ready for it.
I still have the engine here too if you want to mess with it.
I haven't taken it out of the tractor yet though.

I seriously considered going to the pulls, but they're not what they used to be and it was just too darned hot to rub elbows with the fair crowd.

Royse · Jul 25, 2016

(quoted from post at 14:25:33 07/24/16) I saw that and thought, I'll bet Royse would like that! LOL!

I may be interested in the 3 point disc and possibly the plow. Email should be open.

I sent you an email through YT Andy, not sure if it came through.
I'll text you my email address if you don't have it.

tracto-man · Jul 25, 2016

Just sent ya one back.

I think I'll blame Howdy1960

Royse

Well-known Member

howdy1960

Well-known Member

Royse

Well-known Member

Benj R

Member

ScoutB

Member

HFJ

Well-known Member

Royse

Well-known Member

Royse

Well-known Member

Clifford B.

Member

GB in MT.

Well-known Member

Royse

Well-known Member

HFJ

Well-known Member

tracto-man

Member

Royse

Well-known Member

howdy1960

Well-known Member

howdy1960

Well-known Member

ScoutB

Member

Royse

Well-known Member

tracto-man

Member

Similar threads