BlackThumbHomesteader
Member
Was out cutting weeds yesterday and found a new hole where there wasn't one last year. Front left wheel slammed down and sideways. Tried to baby it out continuing foreward but ended up backing out which I'm sure didn't help at all.
Crack extends from the top edge of the pan almost to the inboard curve. Still holding oil fortunately. I'm going to grind and weld but since it's iron I'm wanting to get a replacement in case the welding route doesn't hold.
Crack extends from the top edge of the pan almost to the inboard curve. Still holding oil fortunately. I'm going to grind and weld but since it's iron I'm wanting to get a replacement in case the welding route doesn't hold.