lastcowboy32
Well-known Member
Thanks to some old forum posts that I researched for the inspiration.
I made mine with a twelve dollar C-Clamp from TSC and maybe 30 to 45 minutes of grinding.
Works pretty well.
Critiques always welcome, especially if it helps the next guy.
Three pictures: The raw clamp sized up with the chamber. A view of the bottom foot re-ground. A view of a test fitting with some new valve hardware during grinding.
I made mine with a twelve dollar C-Clamp from TSC and maybe 30 to 45 minutes of grinding.
Works pretty well.
Critiques always welcome, especially if it helps the next guy.
Three pictures: The raw clamp sized up with the chamber. A view of the bottom foot re-ground. A view of a test fitting with some new valve hardware during grinding.