cable style dozer blade?

Does any body recognize the brand of this dozer blade? front bracket mounts were motor and front axel connect. Is this good or bad? also were cable and bracket mount to three point arms has me stumped. Picture of bracket below.
a227994.jpg

a227995.jpg

a227997.jpg

a227998.jpg

a227999.jpg
 
I wish I knew what brand it is, looks just like mine.
I would rather have it hooked to the bolster than to the front
axle itself. A lot less flex at that point and it works well.

36398.jpg


36399.jpg
 
thanks for the picture I would have never thought to put it up high . I saw another post 2010 cj Michigan his went to draw bar between three point but his was flat did not have a 45degree bend . this will be 3 different identical plows in Michigan wonder if someone made them here mine does not look to be all cobbled up someone had talent.
 
I initially thought mine was shop built but I'm not sure now.
They are well built other than the blade angle mechanics.
That needs some work and I'm hoping to fix mine this summer.
I think I've said that same thing for about 6 summers now. :)
 
I agree the front blade not home made I think maybe from a old truck scout or something. Maybe some guy made 3
identical budies of his a nice plow . does yours bolt on rear of tractor 8n were sliding draw bar is 4 bolts . I
would like to leave my draw bar on maybe some fabricating to do so.
 
Yes it bolts to the drawbar holes. Mine being a 2N doesn't
have those holes so someone used one of TheOldHokie's
drawbar brackets to add them and the plow bolts to that.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top