8n hydraulic

swpaguy · May 25, 2016

Ok. I received my gaskets and piston today. When I put everything back together(top cover, pump base and valve spools) should I use sealer? I didn't find any info on torque specs for the pump base, anyone know what that is.

Den N Ms · May 25, 2016

Swpaguy,No sealer on top cover and only lightly if needed for any imperfections at all on pump bottom cover.

souNdguy · May 25, 2016

Top or bottom are seeing pressure at the corner.

Rtv is junk.. But there are so high quality sealers that coil work if needed.. Indian read, aviation gasket maker, etc.

Den N Ms · May 25, 2016

Oh sorry I forgot ,25-30 foot pounds torque on the bolts should work.

swpaguy · May 25, 2016

Thanks for the quick replies.

fusion · May 26, 2016

Motorcraft make a real good sealant
TA-30

8n hydraulic

swpaguy

Member

Den N Ms

Well-known Member

souNdguy

Well-known Member

Den N Ms

Well-known Member

swpaguy

Member

fusion

Member

Similar threads