Paul in Edmonton
Member
I did a 12V conversion last weekend. (Please no debate on that--I did it because my voltage regulator was toast. And since there's no power out at my cabin, it's a whole lot easier to boost the tractor off of my truck, than to haul out a generator and battery charger...)
Anyway, in hooking up the new wiring harness (which fit awesome, BTW), I apparently wrecked the resistor on the terminal block. A new one is on order and should be here in a week or so (depending on the postal system--my last order took three weeks, but it was very heavy).
So my question is: In the meantime, is it safe to run the tractor for a short time without it? How long is too long? I don't want to fry my nice new 12V coil...
Thanks,
-Paul
Anyway, in hooking up the new wiring harness (which fit awesome, BTW), I apparently wrecked the resistor on the terminal block. A new one is on order and should be here in a week or so (depending on the postal system--my last order took three weeks, but it was very heavy).
So my question is: In the meantime, is it safe to run the tractor for a short time without it? How long is too long? I don't want to fry my nice new 12V coil...
Thanks,
-Paul