tracto-man
Member
Got this beast of a 2n all rewired with a 12v system, wired per Jmors wiring diagrams like I always do. Last night was about to put the hood back on., and decided to run
it one more time just to make sure everything was working. Wouldn't fire so I checked and no spark. Grab the test light and find it's not getting through that white
resistor. Tough it and it's REALLY hot. Turned everything off and unplugged it. looks fine to me. Should I be chasing down a short or just replace the resistor?
it one more time just to make sure everything was working. Wouldn't fire so I checked and no spark. Grab the test light and find it's not getting through that white
resistor. Tough it and it's REALLY hot. Turned everything off and unplugged it. looks fine to me. Should I be chasing down a short or just replace the resistor?