13.6/28

steve19438 · Nov 13, 2015

will this size tires fit a 8N?

Jim WI · Nov 13, 2015

I have 12.8x28 turfs on my 2N that I am planning to move to my 8N for mowing next summer. They fit fine but look a little big. I would expect 13.6x28 to fit, but they will look huge. They will also increase the ground speed.

Tiger Joe · Nov 13, 2015

they will fit but will look quite large on an N.

John Deere D · Nov 13, 2015

My brother-in-law installed 13.6x28 on his 8N. Now the BREAKAWAY release arm on his DEARBORN 3 point MOWER, touches the inside of the rear right tire. I fabricated a new arm to allow some clearance.

Ultradog MN · Nov 13, 2015

I put a set of 13.6s on a 2N once just to get it sold.
They looked pretty goofy.
Plus on an 8N you have the faster ground speed increasing the already ridiculously fast reverse speed.

steve19438 · Nov 13, 2015

thanks fellas.

John in Mich · Nov 13, 2015

What the guys said. I have had 13.6s on N's as I bought them. You can alleviate some of the issues by mounting them on a 12" rim rather than on 9s or 10s. You can also move them out {wheel spacing) if there is a clearance problem with a 3 point implement. They won't then fit into the same tight places that you may have been driving. hth

13.6/28

steve19438

Well-known Member

Jim WI

Well-known Member

Tiger Joe

Member

John Deere D

Well-known Member

Ultradog MN

Well-known Member

steve19438

Well-known Member

John in Mich

Well-known Member

Similar threads