So during the process of rebuilding the Jubilee engine, I got to thinking..... (dangerous, I know).
My plan was just to do a preservation, not restoration. After some of the extent of parts and machine work that's had to be done, I'm going to have a pretty Ford red engine mated to a dirty, paint faded transmission and front end.
If a guy wanted to spruce up the rest of the red without completely disassembling for sandblasting, priming, etc, what's the best way you fellas have done for cleaning and prepping for paint? Again not trying to restore.
I've already got the tractor on blocks in my garage, so pressure washing is out.
Tips or ideas appreciated. Thanks!
My plan was just to do a preservation, not restoration. After some of the extent of parts and machine work that's had to be done, I'm going to have a pretty Ford red engine mated to a dirty, paint faded transmission and front end.
If a guy wanted to spruce up the rest of the red without completely disassembling for sandblasting, priming, etc, what's the best way you fellas have done for cleaning and prepping for paint? Again not trying to restore.
I've already got the tractor on blocks in my garage, so pressure washing is out.
Tips or ideas appreciated. Thanks!