FLOLDFORD
Well-known Member
- Location
- Lakeland Florida
Den here some pics of the 8N LCG I put together about 5 years ago. 2000 LCG front axle outer sections with shorten 8N spindles. Front tires and wheels off of
a late New Holland turf tractor and the rears came off of a FMC grove sprayer and I had to build the centers. When I put the rear fenders on it they stuck up
way to high so as you can see by the pic I cut them out and dropped them about 4'' around the rear axle housings. Tractor ended up being about 6'' lower than
stock. I really wanted to put the skinny 24" duals on the rear but at the time I couldn't locate a set. I ran across an 8N modified like this over 20 years
ago in a junk yard near Daytona Beach there wasn't much left of it and I didn't have the funds to bring it home back then. The owner of the scrap yard said it
had been used to pull a small rake on the beach at Daytona by one of the resorts. So years later I put together my own
a late New Holland turf tractor and the rears came off of a FMC grove sprayer and I had to build the centers. When I put the rear fenders on it they stuck up
way to high so as you can see by the pic I cut them out and dropped them about 4'' around the rear axle housings. Tractor ended up being about 6'' lower than
stock. I really wanted to put the skinny 24" duals on the rear but at the time I couldn't locate a set. I ran across an 8N modified like this over 20 years
ago in a junk yard near Daytona Beach there wasn't much left of it and I didn't have the funds to bring it home back then. The owner of the scrap yard said it
had been used to pull a small rake on the beach at Daytona by one of the resorts. So years later I put together my own