8n Mystery Brackets On both sides of PTO

8n8n

New User
The front portion of a bracket broke on my 1948 8N. There are two of them - one for each side of the PTO shaft. I can not find them anywhere or in any Part book or diagram. I am completely stumped. Any help would be much appreciated! Thank you.
 
Do they happen to look like these?

P2150007.jpg
 
YES! YES! YES! That is what I am looking for. Here I thought I was going crazy. Thank you.
a194182.jpg

a194183.jpg
 
Those are the brackets for the actuator arms from a Dearborn 10-14 two way plow.
Worth something - even broken - to someone who has one of those plows.
The correct check chain brackets you want should look something like these - not broken of course. Only photo I could find right now.

100_02171.jpg
 
I sold that plow long time ago and the brackets I had went with it.
I suggest you sell yours and buy an original set from someone or they sell them here at YT. See link below.
Too often the tractor got sold off with the brackets for a plow, mower or loader still on it and were lost.
Nice to see those kinds of things get reunited with the correct implement.
click here
 
For those who aren't familiar with the Dearborn 10-14 two way plow here is a video showing one in action.

<iframe width="420" height="315" src="https://www.youtube.com/embed/pvR7_qE7TTw" frameborder="0" allowfullscreen></iframe>
 
Thought I would post this just in case someone else comes to the forum looking for these brackets. Lots of people looking for them and they are near impossible to find. So having them fabbed is great solution especially with CAD drawings in hand.
A big thanks to Chuck Lyons.
http://www.link_disallowed/manuals/implements/plows/Dearborn-10-14-2Way-Plow-Trip-Bars-Brackets-Wrench.pdf
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top