Dearborn pump and bracket ?

howdy1960

Well-known Member
On a 19-61 Dearborn FEL would the hydraulic pump and mounting bracket been painted same red as the rest of loader?

Was cleaning old paint from part of loader frame this morning and found "YOUNGSTOWN CY" welded onto the frame. My thought is it was made in Youngstown OH. and done by a person with initials CY
 
That's a tough one.
Probably the bracket was painted red along with the other brackets.
I doubt the pump would have painted any color. Ford would have speced it out to any of a number of vendors and they would have just grabbed one off a pallet of them as it was shipped.
CNH doesn't even show a pump though they do show most of the rest of that loader.
If the housing is made of aluminum I would clean it and leave it be.
Cast iron maybe I would paint.
19 81 on CNH
 
That's a tough one.
Probably the bracket was painted red along with the other brackets. I doubt the pump would have painted any color. Ford would have speced it out to any of a number of vendors and they would have just grabbed one off a pallet of them as it was shipped. CNH doesn't even show a pump though they do show most of the rest of that loader. If the housing is made of aluminum I would clean it and leave it be. Cast iron maybe I would paint.

19 81 on CNH

He doesn't have a 19-81. He has a 19-61. CNH does show the pump and the rest of the hydraulics for the 19-61.

19-61 on CNH
 
That's what I was thinking about mounting bracket. Pump is a cast iron Vicker unit so guess either red to match or gray to match tractor is where I'll go.
Thanks, Norm
 
Thanks for the link 8N. According to that the bucket ram parts are still available LMAO
At least it did say the 3 differant buckets are NLS items :eek:
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top