newbie8nowner
Member
I posted a few days ago about being able to move the left wheel on my 8n back and forth while on the ground. I initially thought it was the wheel
bearing but when I finally was able to check it this afternoon the wheel bearing was fine just gunked up with old grease. The problem was the bearing
in the spindle or what was left of the bearing. I have looked on our hosts parts page but did not see any bearings for the spindle and on some of the
other parts stores I see bearings, bushings, and seals. I need some advice on what to order so that I can have everything I need to put it back
together.
bearing but when I finally was able to check it this afternoon the wheel bearing was fine just gunked up with old grease. The problem was the bearing
in the spindle or what was left of the bearing. I have looked on our hosts parts page but did not see any bearings for the spindle and on some of the
other parts stores I see bearings, bushings, and seals. I need some advice on what to order so that I can have everything I need to put it back
together.