re-assembely of exhaust valve keepers (roto cap)

reelstuff · Apr 21, 2015

Hello, I have an 8N that belonged to my father quite some time ago I started on replacing the head gasket and servicing the valves, currently I am stuck in the proper method of assembling the keepers on the exhaust valves, (roto caps)

I have attempted to use the same tools as used to remove the keepers and valves from the valve body, however either I am incorrectly assembling the parts or I have not well understood how they go back together correctly.

I purchased the DVD video (sold here) however this process is not covered, as well the quality of the video is difficult to view some aspects of the process of managing the assembly of the valve train.

Any suggestions, diagrams, thoughts, tips, would be greatly appreciated, )

Hobo,NC · Apr 21, 2015

http://forums.yesterdaystractors.com/viewtopic.php?t=380581&highlight=rotatn

reelstuff · Apr 21, 2015

Thank you for the reply, I had gleaned that thread previously, seems to be a referral thread for the most part, (understand everyone wants to make a living) Ill figure it out, thanks for trying.

Hobo,NC · Apr 21, 2015

(reply to post at 18:08:40 04/21/15)

You assy the unit push it in the hole use a bent screwdriver are tool of you choice push the guide down going thru the intake/exhaust port and install the horseshoe look'N valve guide retainer...

https://photos.yesterdaystractors.c...arameter=hobo,nc&w=pieces&cc=0&s=

You can send the check to me are cash, cash sales preferred and may qualifie for a discount...

reelstuff · Apr 21, 2015

Thanks, sounds like a good plan, ) have a great day.

re-assembely of exhaust valve keepers (roto cap)

reelstuff

New User

Hobo,NC

Well-known Member

reelstuff

New User

Hobo,NC

Well-known Member

reelstuff

New User

Similar threads